Write your store's popup content
Wall-Mounted Intensity Control For Infrared Heater
$95.00
Compatible with Kalglo HS Series Infrared Heaters only.
With Kalglo Wall Mounted Intensity Control, you can adjust your electric infrared heater’s output from the wall!
Turn the dial to HI for full heat when temperatures drop, or lower the setting when milder weather comes through. This control is a great solution for year-round use, allowing you to lower the heat output and use less energy during milder weather.”
With multiple heat levels, you can control your heaters output conveniently from the wall. This works well for heaters mounted high or out of reach.
IMPORTANT: The control voltage must match your heater voltage.
OFF - No heat output
HI – 100% output: At full power, the heater runs continuously until you set the dial to OFF.
6-LO - Output 70%- 23%. These setting provide energy-efficient heat by turning your heater on/off automatically. This keeps your chosen output steady! To get more information on cycle times and other settings, click here.
If you plan to use your heater year-round and install it over 5' high, this accessory is a great fit!
For installation under 5', or if you prefer no additional wiring, check out our RS Series (Built-in intenstiy control).
In stock - Ready to be shipped
Estimated delivery between November 18 and November 23. Order within .
- 1 Indicator Light – Shows when the heater is on
- 1 Metal Cover Plate
- 2 Installation Screws
Adjustable Heat Output – Easily adjust your HS Series heater from full power to lower heat settings.
Energy-Efficient Operation. Lower settings cycle the heater on and off, which reduces energy use when you don’t need full heat.
On/Off Indicator Light – The indicator light shows when the heater is actively heating. Offering peace of mind to know when your heater is on or off.
Easy Wall-Mounted Control – Adjust your heater from a convenient location without needing to access the heater itself.
Simple Installation – Designed for easy and simple installation with the included metal cover plate and mounting screws.
Great for Year-Round Use – Gives you more control over your heater during changing temperatures and milder weather.
Product specifications
AMPS
12.5A (120V & 240V)
Compatible Heaters:
Kalglo HS Series
Control Type:
Dial
Heat Settings:
OFF, LO, 2, 3, 4, 5, 6, HI
Operation:
Cycles heater on and off at lower settings; HI provides continuous full power
Indicator Light:
Amber light illuminates when the heater is actively heating
Installation:
Wall Mounted
FAQs
Wall Mounted Control
Yes. The wall control is hardwired and is designed to fit into a standard electrical box, making it easy to use with new or existing installations.
Kalglo heaters have been used in barns, stalls, wash stalls, and other agricultural spaces since 1969. For safe use, the heater should be installed at least 3' above straw, hay, bedding, and other flammable materials. Always follow the installation and clearance requirements in the Kalglo Installation Manual.
The wall control must match the voltage of your heater. Check your heater’s model or nameplate to confirm whether it is 120V or 240V, then select the same voltage for your wall control.
No, you can use this control only with Kalglo HS Series heaters. RS Series heaters already have a built-in intensity dial and do not require a separate wall control.
